Klarity Contour Pro™
Klarity Contour Pro™ Thermoplastic Splinting Material makes the most rigid, precise fitting splint and orthosis. It easily stretches and molds around contours for a precise fit, and has superior conformability without stretching. Ideal for experienced practitioners, this material requires minimal pulling and is excellent for painful or post-surgical applications. Available in Oyster.
Klarity Contour Pro™
- CP-3200A Klarity Contour Pro™ 3.2mm Solid
- CP-3201A Klarity Contour Pro™ 3.2mm 1% perforation
- CP-3200 Klarity Contour Pro™ 3.2mm Solid
- CP-3201 Klarity Contour Pro™ 3.2mm 1% perforation
Klarity Contour Pro™ Applications
3.2mm Ideal for all upper extremity splints, as bases for dynamic splints, and positioning splints where an intimate fit is required. Makes great immobilizations splints, especially for the hand, wrist, and finger.
Handle using light, smooth strokes. Allow gravity to do the work. Once positioned, splints remain in place, needing only minimal contact to form. Ideal for sensitive joint or skin conditions or for post-surgery application.
Memory Minimal memory when stretched. Molded shape remains in place without any need to hold it while it cools. Splints will hold their shape when mildly reheated.
RTS Minimum resistance to stretch. When gently pulled, will not stretch or thin uncontrollably during the molding process.
Drape Moderate drape and excellent reproduction of detail with gentle handling. Superior conformability without stretching.
Rigidity Maximum rigidity. Splints will hold their shape against the pull of strong dynamic components and against hypertonicity.
Bonding Traditional coating has a light tack that holds the material in place. Use over bandages with minimal adherence. Dry heating two surfaces will form a strong bond. For a permanent bond, use solvent or scrape off coating, apply dry heat, and press together.
Surface Finish Resists fingerprints when handled gently. Lightly heat and rub together to remove marks. Smooth, self-sealing cut edges remain smooth, closed, and rounded even after reheating.
Latex Free Skin friendly and non-irritating. Can be disposed of with normal waste and will biodegrade over time.
Heating and Working Time
Optimum Temperature: 160˚F (70˚C)
Heat in a dry-heat oven or in a waterbath at 160˚F (70˚C) for 1-2 minutes.
The material normally sets in 3-4 minutes, with a working time of 1-2 minutes.