MRI Medibord™ Overlay

Mirak S2 for Siemens Magnetom Espree and Excite 1.5T MRI Machines


Klarity offers the Mirak S2 for Siemens Magnetom Espree and Excite MRI Machines. The overlay provides a clean and flat surface for accurate patient positioning and indexation to enable optimum repeatibility between imaging and treatment. Image fusion with CT images can be undertaken very quickly as table curvature is eliminated.

The Mirak S2 Overlay is placed directly on the rail surface after removing cushions from around the main coil, optimizing bore space. The board is accurately located and locked with oblong sliding pins in each corner. The width is slightly larger than the normal patient area but leaves the t-rails accessible for accessories.

It's low weight of less than 11lbs and its high resilience make the overlay highly suitable for busy MRI rooms, where RT planning in combined with diagnostic scans and the overlay needs to be removed on a regular basis. The head end has a cutout to fit around the head coil unit. It also provides semi-circular recessed indexing points for two-pin indexing bars and other positioning accessories.

The Mirak S2 Overlay has low attenuation. It is fully MRI compatible, RF compatible, and nonconductive.

  • Interlocks onto existing table with 4 oblong pins

  • Works with main coils under board

  • Full table size with cutout for head coil and foot-end

  • T-rail remains fully accessible

  • Low height of 2cm

  • High rigidity

 Dimensions: 166.5cm length x 50.9cm width x 2cm thickness